Αντιστρεπτικές Μπάρες
Υποκατηγορίες που ανήκουν στην κατηγορία Αντιστρεπτικές Μπάρες
-
Χαρακτηριστικά:
• Διάμετρος Front: 24mm and Rear: 25mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
Ferrari 599 GTB, Typ F141/without approval - Year: 06/06>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33074-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
3.078,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
3.078,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 36mm and Rear: 26mm
• Ρύθμιση: Front: 2X and Rear: No
Ταιριάζει σε:
Ford Mustang (Mod. 2005) , from Modell 2005 - Year: 11/04>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33170-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
969,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
969,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 25mm and Rear: 24mm
• Ρύθμιση: Front: 3X and Rear: 3X
Ταιριάζει σε:
Porsche 911 C4 (996), Typ 996, 4WD, Carrera 4, 4S, 911 Turbo, incl. Cabrio/Convertible - Year: 09/98>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33462-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
893,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
893,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 28mm and Rear: 28mm
• Ρύθμιση: Front: 2X and Rear: No
Ταιριάζει σε:
Chevrolet Camaro, Typ GMX521 + GMX511, incl. Facelift 2013 - Year: 2012>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33957-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
857,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
857,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 28mm and Rear: 28mm
• Ρύθμιση: Front: 2X and Rear: No
Ταιριάζει σε:
Chevrolet Camaro, Typ GMX521 + GMX511, Coupe + Cabrio/ Convertible Facelift 2014, from "E" as 10th position of the chassis number. - Year: 2014>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33957-3 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
857,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
857,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 28mm and Rear: 28mm
• Ρύθμιση: Front: 2X and Rear: 3X
Ταιριάζει σε:
Chevrolet Camaro - Year: 2009>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33957-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
857,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
857,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 30mm and Rear: 16mm
• Ρύθμιση: Front: 2X and Rear: No
Ταιριάζει σε:
BMW Z8, Typ Z 52 - Year: 2000>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33380-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
825,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
825,00€
-
Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE
Ταιριάζει σε:
ABARTH 124 348(3/2016-)
FIAT 124 SPIDER(8/2015-)
MAZDA MIATA ND(8/2015-)
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Με TUV έγκριση
Aποστολή σε όλη την Ελλάδα.
Κωδικός: BMK013 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
809,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
809,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:28mm and Rear:28mm
• Ρύθμιση: Front: 2X and Front: 2X and
Ταιριάζει σε:
• Audi A3 + A3 Sportback, Typ 8V, 2WD, only for cars with twist beam RA - Year 13>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:28mm and Rear:28mm
• Ρύθμιση: Front: 2X and Front: 2X and
Ταιριάζει σε:
• Seat Leon incl. SC + FR, Typ 5F, 2WD, only for cars with twist beam RA - Year 13>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:28mm and Rear:28mm
• Ρύθμιση: Front: 2X and Front: 2X
Ταιριάζει σε:
• Seat Leon ST, Typ 5F, 2WD, only for cars with twist beam RA - Year 11/12>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:28mm and Rear:28mm
• Ρύθμιση: Front: 2X and Front: 2X
Ταιριάζει σε:
• Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with twist beam RA - Year 13>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:28mm and Rear:28mm
• Ρύθμιση: Front: 2X and Front: 2X
Ταιριάζει σε:
• VW Golf VII Sedan + Variant/SW + Sportsvan, Typ AU/AUV, 2WD, only for cars with twist beam RA - Year 11/12>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33851-6 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
767,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
767,00€
-
Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE
Ταιριάζει σε:
Nissan GT-R - R35
To kit περιλαμβάνει:
-Εμπρός αντιστρεπτική 33mm ρυθμιζόμενη 2 σημείων
-Πίσω αντιστρεπτική 20mm ρυθμιζόμενη 3 σημείων
-Εμπρός ρυθμιζόμενα μπαράκια ζαμφόρ (σετ των 2)
-Πίσω ρυθμιζόμενα μπαράκια ζαμφόρ (σετ των 2)
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Με TUV έγκριση
Aποστολή σε όλη την Ελλάδα.
Κωδικός: BNK008 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
749,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
749,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 36mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
Nissan Nissan 350Z , Typ Z33 (Fairlady) - Year: 09/03>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33237-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
739,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
739,00€
-
• Μειώνει τις στρεβλώσεις του σασί.
• Βελτιώνει το κράτημα του αυτοκινήτου.
• Μειώνει την υποστροφή και την υπερστροφή.
• Διατηρείται η εργοστασιακή άνεση.
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών.
Χαρακτηριστικά:
• Διάμετρος : Μπροστά Φ27mm / Πίσω Φ18mm
• Ρύθμιση: Μπροστά 2x / Πίσω 2x
Κωδικός: WL-BMK006 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
725,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
725,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:25mm and Rear:27mm
• Ρύθμιση: Front: 2X and Front: 2X
Ταιριάζει σε:
• Mitsubishi EVO VII + EVO VIII +EVO IX , Typ CT9A - Year 01/02>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33322-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
722,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
722,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:25mm
• Ρύθμιση: Front: 2X and Front: 2X and
Ταιριάζει σε:
• Audi A3 + A3 Sportback, Typ 8V, 2WD, only for cars with twist beam RA - Year 13>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:25mm
• Ρύθμιση: Front: 2X and Front: 2X and
Ταιριάζει σε:
• Seat Leon incl. SC + FR, Typ 5F, 2WD, only for cars with twist beam RA - Year 13>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:25mm
• Ρύθμιση: Front: 2X and Front: 2X and
Ταιριάζει σε:
• Seat Leon ST, Typ 5F, 2WD, only for cars with twist beam RA - Year 11/12>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:25mm
• Ρύθμιση: Front: 2X and Front: 2X and
Ταιριάζει σε:
• Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with twist beam RA - Year 13>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:25mm
• Ρύθμιση: Front: 2X and Front: 2X and
Ταιριάζει σε:
• VW Golf VII Sedan + Variant/SW + Sportsvan, Typ AU/AUV, 2WD, only for cars with twist beam RA - Year 11/12>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33851-5 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
709,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
709,00€
-
Τιμή eshop (Με ΦΠΑ)
705,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
705,00€
-
Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE
Ταιριάζει σε:
VOLKSWAGEN GOLF MK7 5G FWD
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Αυστραλία
• Με TUV έγκριση
Aποστολή σε όλη την Ελλάδα.
Κωδικός: BWK018 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
689,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
689,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 28mm
• Ρύθμιση: Front: No and Rear: 2X
Ταιριάζει σε:
Porsche 911 C4 (991) , Typ 991, 4WD, Carrera+Carrera S, incl. Cabrio/ Convertible - Year: 2012>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33880-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
680,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
680,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:30mm and Rear:26mm
• Ρύθμιση: Front: 2X and
Ταιριάζει σε:
• Mercedes A-Class + B-Class, Typ 176/ 246/ 245G, 2WD - Year 2012>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:30mm and Rear:26mm
• Ρύθμιση: Front: 2X and
Ταιριάζει σε:
• Mercedes CLA incl. Shooting Brake, Typ 117/ 245G, 2WD - Year 2013>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:30mm and Rear:26mm
• Ρύθμιση: Front: 2X and
Ταιριάζει σε:
• Mercedes GLA, Typ X156 / 245G, 2WD - Year 2013>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33849-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
678,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
678,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:30mm and Rear:26mm
Ταιριάζει σε:
• Mercedes A-Class + B-Class, Typ 176/ 246 /245G, 4WD - Year 2012>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:30mm and Rear:26mm
Ταιριάζει σε:
• Mercedes CLA incl. Shooting Brake, Typ 117/ 245G, 4WD - Year 2013>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:30mm and Rear:26mm
Ταιριάζει σε:
• Mercedes GLA incl. 45 AMG, Typ X156 / 245G/ 245 G AMG, 4WD - Year 2013>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33849-3 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
678,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
678,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 26mm and Rear: 24mm
• Ρύθμιση: Front: 3X and Rear: 3X
Ταιριάζει σε:
Porsche 911 Turbo (997) , Typ 997 Turboexcept PDK - Year: 06/06>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33239-3 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
678,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
678,00€
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.
Παρακαλώ περιμένετε...