TT

Αντιστρεπτικές μπάρες EIBACH AUDI TT 8N 10.1998 - 06.2016 + QUATTRO- (EIB-013-E1567310) Κατασκευαστής::Eibach Κωδικός:E1567-310 EAN:4050278008839 Διάμετρος εμπρ. άξονα:22mm Εμπρ. άξονα ρύθμιση:2 θέσεις ρύθμισης Ταιριάζει σε: • Audi TT (8N3), TT Roadster (8N9)

Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi A3 + A3 Sportback , Typ 8V, 2WD, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi TT Coupe, Typ 8J/8S, 2WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/ AUV, 2WD - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: VW Golf VII Variant/SW, Typ AU, 2WD - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση

Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi A3 + A3 Sportback Quattro, Typ 8V, 4WD Sedan + Cabrio/ Convertible: i.V. - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi S3 incl. Sedan + Sportback incl. Cabrio/ Convert., Typ 8V, 4WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi S3 Cabrio/ Convertible, Typ 8V + 8VA, 4WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi TT Coupe + Roadster Quattro, Typ 8J/8S, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Seat Leon X-Perience, Typ 5F, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Skoda Octavia Lim+ Sedan/SW, Typ 5E, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: VW Golf VII R incl. Variant/SW R, Typ AU, 4WD - Year 2013> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση

• Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Εμπρ. Πάχος: 25mm • Πίσω Πάχος: 21mm • Εμπρ Ρύθμιση: 2x • Πίσω Ρύθμιση: 2x • Εμπρ. Κωδ.: 33431 VA • Πίσω Κωδ.: 33431 HA Ταιριάζει σε: • Audi S3 Quattro 1999>, Typ 8L, 4WD S Σημείωση: 1. When fitting H&R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not. 2. Height adjustableat the front axle only

Χαρακτηριστικά: • Διάμετρος Front: 25mm and Rear: 25mm • Ρύθμιση: Front: 2X and Rear: No Ταιριάζει σε: Audi TT Coupe+Cabrio Coupe+Convertible , Typ 8N, 2WD, stabilizer-holder at the shock absorber - Year: 1998> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση

Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A3+A3 Sportback incl. Cabrio/ Convertible , Typ 8P, 8PB, 2WD - Year 05/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi TT Coupe+Cabrio Coupe+Convertible , Typ 8J, 2WD - Year 08/06> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Altea incl. XL , Typ 5P, 5PN, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon , Typ 1P, 1PN, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Toledo , Typ 5P, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS , Typ 1Z, 2WD - Year 04/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Superb Sedan, Typ 3T, 2WD - Year 07/08> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Beetle, Typ 16,only 2.0L Turbo - Year 09/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW EOS, Typ 1F, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Golf V Sedan+ GTI+Golf Plus, Typ 1K, 1KP, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Jetta V Sedan, Typ 1KM, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Passat Sedan+ SW+CC, Typ 3C,3CC, 3c, 2WD - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Touran+Cross Touran, Typ 1T, 2WD - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση

Πάχος : Μπροστά 24mm / Πίσω : 22mm Ρυθμίσεις : Μπροστά 2x / Πίσω 2x Ταιριάζει σε: • AUDI TT + TTS (8J) Quattro - (2007 έως 2014)

Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A3 + A3 Sportback , Typ 8V, 2WD, only for cars with multilink RA, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi TT Coupe, Typ 8J/8S, 2WD, only for cars with Multilink rear axle - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/AUV, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Variant/SW, Typ AU, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση

Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi A3 + A3 Sportback Quattro A3 Sedan, Typ 8V, 4WD,only for cars with multilink RA Sedan + Cabrio/ Convertible: i.V. - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi S3 incl. Sedan + Sportback incl. Cabrio/ Convert., Typ 8V, 4WD,only for cars with multilink RA - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi S3 Cabrio/ Convertible, Typ 8V + 8VA, 4WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • Audi TT Coupe + Roadster Quattro, Typ 8J/8S, 4WD,only for cars with multilink RA - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • Seat Leon X-Perience, Typ 5F, 4WD,only for cars with multilink RA - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, Typ 5E, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII R incl. Variant/SW R, Typ AU, 4WD - Year 2013> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση

Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi A3 + A3 Sportback , Typ 8V, 2WD, only for cars with multilink RA, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi TT Coupe, Typ 8J/8S, 2WD, only for cars with Multilink rear axle - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/AUV, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • VW Golf VII Variant/SW, Typ AU, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση

Πλευρά τοποθέτησης: μπροστινός άξονας Διάμετρος [mm]: 27 ρυθμιζόμενο: ρυθμιζόμενο σε δύο κατευθύνσεις Πλευρά τοποθέτησης: πίσω άξονας Διάμετρος [mm]: 25 ρυθμιζόμενο: μη ρυθμιζόμενο Τύπος έγκρισης: με πιστοποιητικό TUV® Προσέξτε τις οδηγίες εγκατάστασης: Κατάσταση αντικειμένου: Κανονική