Γραμμή εξυπηρέτησης : 211 800 9140

Καλωσορίσατε στον κόσμο του αυτοκινήτου και των ανταλλακτικών

211 800 9140

Σειρά 4

Υποκατηγορίες που ανήκουν στην κατηγορία Σειρά 4

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
  1. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3 - M3 (F80) / Σειρά 4 -M4 - (33802-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3 - M3 (F80) / Σειρά 4 -M4 - (33802-1)

    Χαρακτηριστικά: • Διάμετρος: Front:30mm • Ρύθμιση: Front: 2X Ταιριάζει σε: BMW 3er M3 (F80), Typ M3 - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:30mm • Ρύθμιση: Front: 2X Ταιριάζει σε: BMW 4er M4 Coupe (F82) + M4 Cabrio/ Convert. (F83), Typ M3 - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33802-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 396,00€
  2. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3/4 (F30 + F31 + F32 + F34) - (33895-6)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3/4 (F30 + F31 + F32 + F34) - (33895-6)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW , 3er GT, Typ 3L + 3K + 3-V, 4WD/ xDrive, only 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/ xDrive, only 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-6 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  3. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-4)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-4)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 4WD/xDrive, all 4-cylinder except 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 4WD/xDrive, all 4-cylinder, except 320i + 328i , except 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/xDrive, all 4-cylinder, except 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-4 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  4. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - ∅VA28mm/∅20mm - (33895-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - ∅VA28mm/∅20mm - (33895-1)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 2WD, all 4-cylinder except 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 2WD, all 4-cylinder except 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 2WD, all 4-cylinder except 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  5. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-5)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-5)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 2WD, only 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 2WD, only 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 2WD, only 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-5 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  6. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-3)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-3)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-3 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.