Αντιστρεπτικές Μπάρες
Υποκατηγορίες που ανήκουν στην κατηγορία Αντιστρεπτικές Μπάρες
-
Χαρακτηριστικά:
• Διάμετρος: Front:32mm
• Ρύθμιση: Front: 2X
Ταιριάζει σε:
Audi A4 Lim.+Avant/Sedan+SW 2WD+Quattro , Typ B5 (8D), 2WD+4WD - Year 11/94>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:32mm
• Ρύθμιση: Front: 2X
Ταιριάζει σε:
VW Passat Sedan+ SW, Typ 3B/3BG, 2WD+4WD - Year 10/96>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33591-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
415,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
415,00€
-
• Front Sway Bar 27mm για Honda Civic/Crx/Integra από 1990-2000
• Εμπρός αντιστρεπτική διαμέτρου 27mm
• Βελτιώνει την ακαμψία του αυτοκινήτου
• Βελτιώνει τη ασφάλεια του αυτοκινήτου
• Λευκό χρώμα
Κωδικός: 219628 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
415,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
415,00€
-
Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE
Ταιριάζει σε:
BMW 3series (E90/91/92/93)
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Με TUV έγκριση
Aποστολή σε όλη την Ελλάδα.
Κωδικός: BBK004 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
439,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
439,00€
-
Mercedes SLK R170
Χαρακτηριστικά:
• Διάμετρος εμπρό : 30mm
• Ρύθμιση: Οχι
• Μόνο για οχήματα με πίσω αντιστρεπτική μπάρα !
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33769-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
466,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
466,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Seat Toledo , Typ 1L - Year 1991>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Corrado, Typ 53i, except VR6 - Year 11/88>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Golf II, Typ 19E - Year 08/83>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Golf III Sedan Cabrio/Convertible, Typ 1HXO, 1H, 1EXO, 1E,only 4-hole-wheelwithout GTI-TDI (110 PS), GTI, 16V+VR6/incl. TDI - Year 1991>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Jetta II, Typ 19E - Year 08/83>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Vento Sedan, Typ 1HXO, 1H,only 4-hole-wheelwithout GTI-TDI (110 PS), GTI, 16V+VR6/incl. TDI - Year 1991>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33865-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
483,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
483,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 22mm and Rear: 25mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
VW Golf III Variant/SW, Typ 1HX0, 1H without approval - Year: 93>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33865-4 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
502,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
502,00€
-
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Εμπρ. Πάχος: 25mm
• Πίσω Πάχος: 21mm
• Εμπρ Ρύθμιση: 2x
• Πίσω Ρύθμιση: 2x
• Εμπρ. Κωδ.: 33431 VA
• Πίσω Κωδ.: 33431 HA
Ταιριάζει σε:
• Audi S3 Quattro 1999>, Typ 8L, 4WD S
Σημείωση:
1. When fitting H&R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not.
2. Height adjustableat the front axle only
Κωδικός: HR-33431-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
509,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
509,00€
-
Τιμή eshop (Με ΦΠΑ)
509,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
509,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 23mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
Opel Corsa C, Typ Corsa C (not for GSI) - Year: 09/00>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33315-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
509,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
509,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 28mm and Rear: 19mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
BMW Z3 Roadster+Coupe (E37), Typ R/C - Year: 04/96>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33758-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
517,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
517,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 26mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
Opel Corsa B, Tigra A, Typ Corsa B+S93, Typ S93 Coupe - Year: 08/83>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33841-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
517,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
517,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 25mm and Rear: 20mm
• Ρύθμιση: Front: No and Rear: 2X
Ταιριάζει σε:
Chrysler/Dodge PT-Cruiser, Typ PT - Year: 2000>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33371-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
517,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
517,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 28mm and Rear: 19mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
BMW 3er (E36) Compact , Typ 3C, 3/CG - Year: 04/94>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33973-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
517,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
517,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 26mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
Opel Corsa A, Corsa A Coupe , Typ Corsa -A, Corsa -A-CC - Year: 08/83>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33841-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
532,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
532,00€
-
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Εμπρ. Πάχος: 25mm
• Πίσω Πάχος: 28mm
• Εμπρ. Κωδ.: 33 865 VA3 (Μη Ρυθμιζόμενη)
• Πίσω Κωδ.: 33 865 HA2 (3 Σκάλες Ρύμισης)
Κωδικός: 33865-3 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
534,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
534,00€
-
Τιμή eshop (Με ΦΠΑ)
534,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
534,00€
-
Τιμή eshop (Με ΦΠΑ)
534,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
534,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:27mm and Rear:18mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Mini Mini, Mini One, Mini One D, Cooper, , Cooper S, Typ R50 (R52,R53), for Mini One and Mini D without sport suspension no rear axle stabilizer can be fitted) /without „John Cooper Works GP“ - Year 2001>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:27mm and Rear:18mm
• Ρύθμιση: Front: No and Front: 2X and
Ταιριάζει σε:
• Mini Mini Cabrio/ Convertible , Typ R50 (R52,R53), for Mini One and Mini D without sport suspension no rear axle stabilizer can be fitted) /without „John Cooper Works GP“ - Year 2001>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33338-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
534,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
534,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 25mm and Rear: 18mm
• Ρύθμιση: Front: 2X and Rear: 3X
Ταιριάζει σε:
Mazda MX5, Typ NA - Year: 89>98
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33839-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
534,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
534,00€
-
Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE
Ταιριάζει σε:
MAZDA MIATA NC
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Με TUV έγκριση
Aποστολή σε όλη την Ελλάδα.
Κωδικός: BMK004 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
539,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
539,00€
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.
Παρακαλώ περιμένετε...