Γραμμή εξυπηρέτησης : 211 800 9140

Καλωσορίσατε στον κόσμο του αυτοκινήτου και των ανταλλακτικών

211 800 9140

Αντιστρεπτικές Μπάρες

Υποκατηγορίες που ανήκουν στην κατηγορία Αντιστρεπτικές Μπάρες

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3 (E30) - (33577-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3 (E30) - (33577-1)

    Χαρακτηριστικά: • Διάμετρος Front: 22mm and Rear: 18mm • Ρύθμιση: Front: 3X and Rear: 2X Ταιριάζει σε: BMW 3er (E30) incl. M3 Sedan+Cabrio/Convertible , Touring/SW, Typ 3/1, 3/R, 2WD, incl. M3 - Year: 11/82> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. 3. For cars BMW E30 without OE-rear axle stabilizer the following original BMW spare parts are needed for mounting the H&R stabilizer (2 of each), retaining clip stabilizer: 33551129195, hexagon screw with disc: 07119915066, sway bar link: 33551126932, hexagon screw: 07119912501, self locking hexagon nut: 07129946400, sway bar link holder: 33321127717, self locking collar nut: 31331092887. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33577-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 549,00€
  2. Αντιστρεπτικές μπάρες  H&R HONDA ACCORD SEDAN (CL7 + CL9 + CN1) - (33251-1)

    Αντιστρεπτικές μπάρες H&R HONDA ACCORD SEDAN (CL7 + CL9 + CN1) - (33251-1)

    Χαρακτηριστικά: • Διάμετρος Front: 28mm and Rear: 20mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: Honda Accord Sedan , Typ CL7, CL9, CN1 - Year: 01/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33251-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 549,00€
  3. Αντιστρεπτικές μπάρες  H&R FORD FOCUS - (33458-1)

    Αντιστρεπτικές μπάρες H&R FORD FOCUS - (33458-1)

    Χαρακτηριστικά: • Διάμετρος: Front:24mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Ford Focus Sedan, Typ DAW, DBW, DFW, DAX, DBX, DA1, DB1 - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:24mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Ford Focus SW, Typ DNW, DNX, DN1 - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:24mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Ford Focus ST170 , Typ DNW, DNX, DN1 - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:24mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Ford Focus RS Focus Sedan , Focus Tunier/ SW, Typ DBY - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33458-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 550,00€
  4. Αντιστρεπτικές μπάρες H&R Group Vag - (33525-2)

    Αντιστρεπτικές μπάρες H&R Group Vag - (33525-2)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Audi A3 , Typ 8L, 2WD - Year 08/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Seat Leon , Typ 1M, 2WD except Cupra R - Year 1999> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Seat Toledo , Typ 1M, 2WD except Cupra R - Year 1999> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW , Typ 1U, 2WD except RS Modelle/version - Year 01/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • VW Beetle, Typ 9C, 1Y, 1C, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • VW Bora Lim.+Sedan+SW, Typ 1J, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • VW Golf IV Sedan SW, Typ 1J, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33525-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 551,00€
  5. Αντιστρεπτικές μπάρες  H&R AUDI TT (8N) - (33431-2)

    Αντιστρεπτικές μπάρες H&R AUDI TT (8N) - (33431-2)

    Χαρακτηριστικά: • Διάμετρος Front: 25mm and Rear: 25mm • Ρύθμιση: Front: 2X and Rear: No Ταιριάζει σε: Audi TT Coupe+Cabrio Coupe+Convertible , Typ 8N, 2WD, stabilizer-holder at the shock absorber - Year: 1998> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33431-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 551,00€
  6. Αντιστρεπτικές μπάρες  H&R MERCEDES C-CLASS + CLK (W202 + 208) - (33749-1)

    Αντιστρεπτικές μπάρες H&R MERCEDES C-CLASS + CLK (W202 + 208) - (33749-1)

    Χαρακτηριστικά: • Διάμετρος Front: 26mm and Rear: 18mm • Ρύθμιση: Front: No and Rear: No Ταιριάζει σε: Mercedes W202+208 (C-Klasse+CLK), Coupe/Sedan/SW all except 4-Cyl. without Kompressor, CLK W208 - Year: 01/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33749-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 551,00€
  7. Αντιστρεπτικές μπάρες  H&R W202+208 - (33749-2)

    Αντιστρεπτικές μπάρες H&R W202+208 - (33749-2)

    Τιμή eshop (Με ΦΠΑ) 551,00€
  8. Αντιστρεπτικές μπάρες Whiteline SUBARU IMPREZA WRX STI GV - (BSK012)

    Αντιστρεπτικές μπάρες Whiteline SUBARU IMPREZA WRX STI GV - (BSK012)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: SUBARU IMPREZA WRX STI GV SEDAN, GR HATCH • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BSK012 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 559,00€
  9. Αντιστρεπτικές μπάρες Whiteline NISSAN 350Z - (BNK006)

    Αντιστρεπτικές μπάρες Whiteline NISSAN 350Z - (BNK006)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: NISSAN 350Z • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BNK006 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 559,00€
  10. Αντιστρεπτικές μπάρες Whiteline MAZDA 3 (BK-BL) - (BFK003)

    Αντιστρεπτικές μπάρες Whiteline MAZDA 3 (BK-BL) - (BFK003)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: Mazda 3 BK-BL To kit περιλαμβάνει: -Εμπρός αντιστρεπτική 24mm -Πίσω αντιστρεπτική 24mm ρυθμιζόμενη 2 σημείων -Εμπρός ρυθμιζόμενα μπαράκια ζαμφόρ (σετ των 2) -Πίσω μπαράκια ζαμφόρ (σετ των 2) • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BFK003 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 559,00€
  11. Αντιστρεπτικές ράβδοι H&R BMW Σειρά 3 (E36) - (33925-1)

    Αντιστρεπτικές ράβδοι H&R BMW Σειρά 3 (E36) - (33925-1)

    Χαρακτηριστικά: • Διάμετρος Εμπρός: 28mm O & πίσω: 21mm O • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW 3er (E36) Sedan+ Coupe/Cabrio/Convertible , Touring/SW, Typ 3C, 3/C, 3B, 3/B - Year: 06/92> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33925-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 560,00€
  12. Αντιστρεπτικές μπάρες  H&R MERCEDES E-CLASS (W210) - (33724-1)

    Αντιστρεπτικές μπάρες H&R MERCEDES E-CLASS (W210) - (33724-1)

    Χαρακτηριστικά: • Διάμετρος Front: 30mm and Rear: 20mm • Ρύθμιση: Front: 2X and Rear: No Ταιριάζει σε: Mercedes W210 (E-Klasse) , Sedan+SW, for car with or without self levelling, only 2WD - Year: 06/95> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33724-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 568,00€
  13. Αντιστρεπτικές μπάρες  H&R SUBARU IMPREZA GT (GFC + GC + GF ) - (33375-1)

    Αντιστρεπτικές μπάρες H&R SUBARU IMPREZA GT (GFC + GC + GF ) - (33375-1)

    Χαρακτηριστικά: • Διάμετρος Front: 22mm and Rear: 25mm • Ρύθμιση: Front: No and Rear: 3X Ταιριάζει σε: Subaru Impreza GT, Typ GFC/GC/GF - Year: 96>00 Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33375-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 568,00€
  14. Αντιστρεπτικές μπάρες  H&R SUBARU IMPREZA (GG / GD / GGS) - (33339-1)

    Αντιστρεπτικές μπάρες H&R SUBARU IMPREZA (GG / GD / GGS) - (33339-1)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Subaru Impreza WRX, Typ GG/GD/GGS, am only for cars with plastic-sway bar link on RA - Year 01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Subaru Impreza WRX STI, Typ GG/GD/GGS, am only for cars with plastic-sway bar link on RA, up to Model 2004 - Year 01>07/04 Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33339-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 568,00€
  15. Αντιστρεπτικές μπάρες  H&R Subaru Impreza WRX & STI (GG/GD/GGS) - Φ22mm / Φ25mm- (33339-2)

    Αντιστρεπτικές μπάρες H&R Subaru Impreza WRX & STI (GG/GD/GGS) - Φ22mm / Φ25mm- (33339-2)

    Χαρακτηριστικά: • Διάμετρος Front: 22mm and Rear: 25mm • Ρύθμιση: Front: No and Rear: 3X Ταιριάζει σε: Subaru Impreza WRX + WRX STI Impreza, Typ GG/GD/GGS, only for cars with metal-sway bar link on RA, from Model 2005 - Year: 07/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33339-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 568,00€
  16. Αντιστρεπτικές μπάρες  H&R BMW Z3 (MR/C) - (33936-2)

    Αντιστρεπτικές μπάρες H&R BMW Z3 (MR/C) - (33936-2)

    Χαρακτηριστικά: • Διάμετρος Front: 28mm and Rear: 21mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW Z3 M-Roadster+ M-Coupe, Typ MR/C - Year: 04/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33936-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 568,00€
  17. Αντιστρεπτικές μπάρες Whiteline NISSAN 370Z - (BNK014)

    Αντιστρεπτικές μπάρες Whiteline NISSAN 370Z - (BNK014)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: NISSAN 370Z • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BNK014 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 569,00€
  18. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1 & 3 (E81, E87, E82, E88) Σειρά 3 (E90,Ε91, E92, Ε93) - 2 Τμχ. - (33211-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1 & 3 (E81, E87, E82, E88) Σειρά 3 (E90,Ε91, E92, Ε93) - 2 Τμχ. - (33211-1)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:20mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • BMW 1er (E81+E87+E82+E88) Sedan+Coupe+Cabrio/ , Convertible, Typ 187, 182, 1K2, 1K4, 1C, 2WD, only cars with a straight front bar, without middle-crank, not for Servotronic (Bild) - Year 09/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:20mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • BMW 3er (E90/92) Sedan/Coupe 3er (E91) Touring/SW , 3er (E93) Cabrio/Convertible, Typ 390L, 392C, 3K, 3L, 3C, 2WD, incl. cars without active steering, only cars with a straight front bar, without middle-crank - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33211-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 569,00€
  19. Αντιστρεπτικές μπάρες  H&R AUDI A4 / RS4 / S4 (B5) - (33372-1)

    Αντιστρεπτικές μπάρες H&R AUDI A4 / RS4 / S4 (B5) - (33372-1)

    Χαρακτηριστικά: • Διάμετρος: Front:32mm and Rear:17mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A4 Sedan+Avant/ SW Quattro , Typ B5, 4WD - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:32mm and Rear:17mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi RS4 Avant/SW , Typ B5, 4WD - Year 2000> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:32mm and Rear:17mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi S4 Sedan+Avant/ SW , Typ B5, 4WD - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33372-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 586,00€
  20. Αντιστρεπτικές μπάρες  H&R AUDI A4 (Β6 / B7) - 32mm / 20mm - (33358-1)

    Αντιστρεπτικές μπάρες H&R AUDI A4 (Β6 / B7) - 32mm / 20mm - (33358-1)

    Τιμή eshop (Με ΦΠΑ) 586,00€

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.