Γραμμή εξυπηρέτησης : 211 800 9140

Καλωσορίσατε στον κόσμο του αυτοκινήτου και των ανταλλακτικών

211 800 9140

Αντιστρεπτικές Μπάρες

Υποκατηγορίες που ανήκουν στην κατηγορία Αντιστρεπτικές Μπάρες

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. Αντιστρεπτικές μπάρες H&R Audi A3 (8P), TT (8J) / Seat Leon (1P) / Skoda Octavia (1Z) / VW Golf 5, EOS, Passat 3C, CC - (33258-1)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8P), TT (8J) / Seat Leon (1P) / Skoda Octavia (1Z) / VW Golf 5, EOS, Passat 3C, CC - (33258-1)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A3+A3 Sportback incl. Cabrio/ Convertible , Typ 8P, 8PB, 2WD - Year 05/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi TT Coupe+Cabrio Coupe+Convertible , Typ 8J, 2WD - Year 08/06> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Altea incl. XL , Typ 5P, 5PN, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon , Typ 1P, 1PN, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Toledo , Typ 5P, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS , Typ 1Z, 2WD - Year 04/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Superb Sedan, Typ 3T, 2WD - Year 07/08> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Beetle, Typ 16,only 2.0L Turbo - Year 09/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW EOS, Typ 1F, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Golf V Sedan+ GTI+Golf Plus, Typ 1K, 1KP, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Jetta V Sedan, Typ 1KM, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Passat Sedan+ SW+CC, Typ 3C,3CC, 3c, 2WD - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Touran+Cross Touran, Typ 1T, 2WD - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33258-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 586,00€
  2. Αντιστρεπτικές μπάρες H&R AUDI TT + TTS (8J) Quattro - (33220-2)

    Αντιστρεπτικές μπάρες H&R AUDI TT + TTS (8J) Quattro - (33220-2)

    Πάχος : Μπροστά 24mm / Πίσω : 22mm Ρυθμίσεις : Μπροστά 2x / Πίσω 2x Ταιριάζει σε: • AUDI TT + TTS (8J) Quattro - (2007 έως 2014)
    Κωδικός: 33220-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 588,00€
  3. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - ∅VA28mm/∅20mm - (33895-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - ∅VA28mm/∅20mm - (33895-1)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 2WD, all 4-cylinder except 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 2WD, all 4-cylinder except 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 2WD, all 4-cylinder except 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  4. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-5)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-5)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 2WD, only 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 2WD, only 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 2WD, only 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-5 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  5. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-3)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-3)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-3 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  6. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3/4 (F30 + F31 + F32 + F34) - (33895-6)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3/4 (F30 + F31 + F32 + F34) - (33895-6)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW , 3er GT, Typ 3L + 3K + 3-V, 4WD/ xDrive, only 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/ xDrive, only 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-6 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  7. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-4)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-4)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 4WD/xDrive, all 4-cylinder except 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 4WD/xDrive, all 4-cylinder, except 320i + 328i , except 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/xDrive, all 4-cylinder, except 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-4 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  8. Αντιστρεπτική μπάρα Eibach Ford Fiesta ST MK7.5 (08-17) - (35143.32)

    Αντιστρεπτική μπάρα Eibach Ford Fiesta ST MK7.5 (08-17) - (35143.32)

    Τιμή eshop (Με ΦΠΑ) 590,00€
  9. Αντιστρεπτικές μπάρες  H&R VW Golf 6 (1K/1KM) + Scrirocco (13) - (33014-1)

    Αντιστρεπτικές μπάρες H&R VW Golf 6 (1K/1KM) + Scrirocco (13) - (33014-1)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Golf VI incl. Plus, Typ 1K - Year 10/08> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Golf VI Variant /SW, Typ 1KM - Year 09/09> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Golf VI Cabrio/ convertible, Typ 1K - Year 06/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Scirocco III, Typ 13 - Year 08/08> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33014-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 592,00€
  10. Αντιστρεπτικές μπάρες  H&R BMW X3 (X83) - (33224-1)

    Αντιστρεπτικές μπάρες H&R BMW X3 (X83) - (33224-1)

    Χαρακτηριστικά: • Διάμετρος Front: 26mm and Rear: 23mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW X3, Typ X83 - Year: 01/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33224-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 597,00€
  11. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3 (E36) (M3) - (33936-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3 (E36) (M3) - (33936-1)

    Χαρακτηριστικά: • Διάμετρος Front: 28mm and Rear: 24mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW 3er (E36) M3 Sedan Cabrio/Convertible , Typ M3B, M3/B - Year: 03/93> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33936-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 597,00€
  12. Αντιστρεπτικές μπάρες Whiteline VW GOLF 5 + 6 / PASSAT (3C) - (BWK002)

    Αντιστρεπτικές μπάρες Whiteline VW GOLF 5 + 6 / PASSAT (3C) - (BWK002)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: VW Golf 5/6, Passat 3C • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BWK002 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 599,00€
  13. Αντιστρεπτικές μπάρες H&R Porsche Boxster & S (986) - Φ26mm / Φ22mm - 2 Τεμ. - (33511-1)

    Αντιστρεπτικές μπάρες H&R Porsche Boxster & S (986) - Φ26mm / Φ22mm - 2 Τεμ. - (33511-1)

    Χαρακτηριστικά: • Διάμετρος Front: 26mm and Rear: 22mm • Ρύθμιση: Front: No and Rear: 2X Ταιριάζει σε: Porsche Boxster+Boxster S , Typ 986 - Year: 10/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33511-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 599,00€
  14. Αντιστρεπτικές μπάρες  H&R MERCEDES-BENZ C-CLASS+CLK (W203 + W209) - (33367-2)

    Αντιστρεπτικές μπάρες H&R MERCEDES-BENZ C-CLASS+CLK (W203 + W209) - (33367-2)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:19mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Mercedes W203 (C-Class+CLK), 2WD, Sedan/SW/Sportcoupe incl. C32 AMG, only for cars with sway-bar-link-drilling o 12mm at the FA-stabilizer - Year 2000> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. 3. for car with chassis number (last seven numbers) ....A497761 / ...F410043 ....R111834 the following original Mercedes retaining clamp must be used: Original MB-part number: A2033231240 (right) + A2033231140 (left). These have to be exchanged against the original reatining clamps. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:19mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Mercedes W209 (C-Class+CLK), 2WD, Sedan/SW/Sportcoupe incl. C32 AMG, W 209 incl. CLK 500, just cars with sway-bar-link-drilling o12mm at the FA-stabilizer - Year 2000> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. 3. for car with chassis number (last seven numbers) ....A497761 / ...F410043 ....R111834 the following original Mercedes retaining clamp must be used: Original MB-part number: A2033231240 (right) + A2033231140 (left). These have to be exchanged against the original reatining clamps. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33367-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 603,00€
  15. Αντιστρεπτικές Μπάρες  H&R Audi A3 & S3 (8P) Quattro / Skoda Octavia (1Z) & Superb II 4x4 / VW Golf 5 & 6 / Passat 3C & CC / Tiguan (5N) - (33220-1)

    Αντιστρεπτικές Μπάρες H&R Audi A3 & S3 (8P) Quattro / Skoda Octavia (1Z) & Superb II 4x4 / VW Golf 5 & 6 / Passat 3C & CC / Tiguan (5N) - (33220-1)

    Πάχος μπροστά: 24mm / πίσω 26mm Ρυθμίσεις μπροστά 2x / πίσω 2x
    Κωδικός: 33220-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 603,00€
  16. Αντιστρεπτικές μπάρες  H&R AUDI A4/RS4/S4 (B5) - (33372-2)

    Αντιστρεπτικές μπάρες H&R AUDI A4/RS4/S4 (B5) - (33372-2)

    Χαρακτηριστικά: • Διάμετρος: Front:32mm and Rear:21mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A4 Sedan+Avant/ SW Quattro , Typ B5, 4WD, Sportversion - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:32mm and Rear:21mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi RS4 Avant/SW , Typ B5, 4WD - Year 2000> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:32mm and Rear:21mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi S4 Sedan+Avant/ SW, Typ B5, 4WD - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33372-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 603,00€
  17. Αντιστρεπτικές μπάρες  H&R AUDI A6 (4B) - (33524-1)

    Αντιστρεπτικές μπάρες H&R AUDI A6 (4B) - (33524-1)

    Χαρακτηριστικά: • Διάμετρος Front: 32mm and Rear: 22mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: Audi A6 Lim.+Avant Quattro Sedan+SW , Typ 4B, 4WD - Year: 06/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33524-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 603,00€
  18. Σετ Αντιστρεπτικές μπάρες H&R Z4 - E85 / E86 -  (33276-1)

    Σετ Αντιστρεπτικές μπάρες H&R Z4 - E85 / E86 - (33276-1)

    Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση • Διάμετρος : Μπροστά 27mm και Πίσω 21mm • Ρύθμιση: Μπροστά 2x και Πίσω 3χ • Ταιριάζει σε: BMW Z4 E85 - Roadster/ E86-Coupe (2003 έως 2008) • Εμπρ. Κωδ.: 33276 VA • Πίσω Κωδ.: 33276 HA
    Κωδικός: 33276-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 603,00€
  19. Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8)

    Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Ibiza incl. Cupra + FR, Typ 6Y, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Seat Ibiza, Typ 6J, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 6Y, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 5J, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • VW Fox , Typ 5Z, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Polo incl. GTI , Typ 9N, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-8 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 604,00€
  20. Αντιστρεπτικές μπάρες  H&R AUDI A2, (TYP 8Z)  - (33388-2)

    Αντιστρεπτικές μπάρες H&R AUDI A2, (TYP 8Z) - (33388-2)

    Χαρακτηριστικά: • Διάμετρος Front: 22mm and Rear: 25mm • Ρύθμιση: Front: No and Rear: No Ταιριάζει σε: Audi A2, Typ 8Z, all except 1.2 TDI - Year: 2000> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33388-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 604,00€

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.