Γραμμή εξυπηρέτησης : 211 800 9140

Καλωσορίσατε στον κόσμο του αυτοκινήτου και των ανταλλακτικών

211 800 9140

Seat

Υποκατηγορίες που ανήκουν στην κατηγορία Seat

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 1
  2. 2
  1. Αντιστρεπτική μπάρα ρυθμιζόμενη πίσω Whiteline  AUDI SEAT SKODA VW - (BWR23Z)

    Αντιστρεπτική μπάρα ρυθμιζόμενη πίσω Whiteline AUDI SEAT SKODA VW - (BWR23Z)

    WHITELINE πίσω ρυθμιζόμενη αντιστρεπτική 24mm Heavy Duty AUDI A1 MK1 TYP 8X SEAT IBIZA MK4 6J SKODA FABIA MK3 NJ VOLKSWAGEN POLO 6R 6C AUDI A1 2010-2018 - A1 MK1 (TYP 8X) SEAT IBIZA 2008-2017 - IBIZA MK4 (TYP 6J) SKODA FABIA 2014-ON - FABIA MK3 (TYP NJ) VOLKSWAGEN POLO 2009-2017 - POLO MK5 (TYP 6R AND 6C) • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση
    Κωδικός: BWR23Z - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 249,00€
  2. Αντιστρεπτικές μπάρες  H&R Audi A1 (8X) / Seat Ibiza (6L) / Skoda Fabia (6Y) / VW Polo (9N) + Fox (5Z) - 1 Τεμ. - (33325-2)

    Αντιστρεπτικές μπάρες H&R Audi A1 (8X) / Seat Ibiza (6L) / Skoda Fabia (6Y) / VW Polo (9N) + Fox (5Z) - 1 Τεμ. - (33325-2)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Audi A1 incl. Sportback, Typ 8X, 2WD - Year 08/10> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Seat Ibiza/ Cordoba incl. Cupra + FR , Typ 6L, 2WD - Year 03/02> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Skoda Fabia incl. SW, incl. RS , Typ 6Y - Year 01/00> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Skoda Fabia incl. SW, incl. RS , Typ 5J - Year 03/07> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Fox, Typ 5Z - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Polo incl. GTI, Typ 9N - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 306,00€
  3. Aντιστρεπτική Mπάρα Eμπρός 22mm H&R Audi A3 (8L) / Seat Leon (1M) / Skodna Octavia (1U) / VW Golf 4 - (33525-1)

    Aντιστρεπτική Mπάρα Eμπρός 22mm H&R Audi A3 (8L) / Seat Leon (1M) / Skodna Octavia (1U) / VW Golf 4 - (33525-1)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Audi A3 , Typ 8L, 2WD - Year 08/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Seat Leon , Typ 1M, 2WD except Cupra R - Year 1999> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Seat Toledo , Typ 1M, 2WD except Cupra R - Year 1999> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Skoda Octavia Lim+ Sedan/SW , Typ 1U, 2WD except RS Modelle/version - Year 01/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Beetle+Beetle Cabrio/ Convertible, Typ 9C, 1Y, 1C, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Bora Lim.+Sedan+SW, Typ 1J, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Golf IV Sedan SW, Typ 1J, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33525-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 321,00€
  4. Αντιστρεπτική μπάρα H&R Group Vag - (33851-1)

    Αντιστρεπτική μπάρα H&R Group Vag - (33851-1)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi A3 + A3 Sportback , Typ 8V, 2WD, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi TT Coupe, Typ 8J/8S, 2WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/ AUV, 2WD - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm • Ρύθμιση: Front: 2X Ταιριάζει σε: VW Golf VII Variant/SW, Typ AU, 2WD - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 336,00€
  5. Αντιστρεπτική μπάρα H&R Group Vag - (33851-7)

    Αντιστρεπτική μπάρα H&R Group Vag - (33851-7)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi A3 + A3 Sportback Quattro, Typ 8V, 4WD Sedan + Cabrio/ Convertible: i.V. - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi S3 incl. Sedan + Sportback incl. Cabrio/ Convert., Typ 8V, 4WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi S3 Cabrio/ Convertible, Typ 8V + 8VA, 4WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Audi TT Coupe + Roadster Quattro, Typ 8J/8S, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Seat Leon X-Perience, Typ 5F, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: Skoda Octavia Lim+ Sedan/SW, Typ 5E, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm • Ρύθμιση: Front: 2X Ταιριάζει σε: VW Golf VII R incl. Variant/SW R, Typ AU, 4WD - Year 2013> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-7 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 366,00€
  6. Αντιστρεπτική μπάρα H&R Group Vag - (33325-1)

    Αντιστρεπτική μπάρα H&R Group Vag - (33325-1)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Seat Ibiza/ Cordoba incl. Cupra + FR , Typ 6L, 1P, 2WD, Set incl. 2 sway-bar-links for coil-over 29325-1 - Year 03/02> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Skoda Fabia incl. Kombi incl. SW, incl. RS , Typ 6Y, Set incl. 2 sway-bar links for coil-over kit 29325-1 - Year 01/00> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: Skoda Fabia incl. Kombi incl. SW, incl. RS , Typ 5J, Set incl. 2 sway-bar links for coil-over kit - Year 03/07> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Fox, Typ 5Z, 29325-1/Set incl. 2 sway-bar-links for coil-over 29325-1 - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Polo incl. GTI, Typ 9N 29325-1/Set incl. 2 sway-bar-links for coil-over 29325-1 - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 366,00€
  7. Αντιστρεπτική μπάρα H&R Group Vag - (33851-3)

    Αντιστρεπτική μπάρα H&R Group Vag - (33851-3)

    Τιμή eshop (Με ΦΠΑ) 366,00€
  8. Αντιστρεπτική μπάρα H&R Group Vag - (33985-1)

    Αντιστρεπτική μπάρα H&R Group Vag - (33985-1)

    Χαρακτηριστικά: • Διάμετρος: Front:21mm • Ρύθμιση: Front: No Ταιριάζει σε: Seat Arosa , Typ 6H, 6HS - Year 06/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:21mm • Ρύθμιση: Front: No Ταιριάζει σε: Seat Ibiza/Cordoba incl. Vario , Typ 6K except Cupra+Cordoba 6K/C - Year 1993> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:21mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Lupo, incl. GTI, Typ 6X, 6ES, FSI+3L Lupo, incl. Classic+Variant/SW - Year 09/98> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:21mm • Ρύθμιση: Front: No Ταιριάζει σε: VW Polo, Typ 6N, 6KV, incl. Classic+Variant/SW - Year 09/94> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33985-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 380,00€
  9. Αντιστρεπτικές μπάρες H&R Group Vag - (33865-1)

    Αντιστρεπτικές μπάρες H&R Group Vag - (33865-1)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Toledo , Typ 1L - Year 1991> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Corrado, Typ 53i, except VR6 - Year 11/88> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Golf II, Typ 19E - Year 08/83> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Golf III Sedan Cabrio/Convertible, Typ 1HXO, 1H, 1EXO, 1E,only 4-hole-wheelwithout GTI-TDI (110 PS), GTI, 16V+VR6/incl. TDI - Year 1991> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Jetta II, Typ 19E - Year 08/83> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Vento Sedan, Typ 1HXO, 1H,only 4-hole-wheelwithout GTI-TDI (110 PS), GTI, 16V+VR6/incl. TDI - Year 1991> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33865-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 483,00€
  10. Αντιστρεπτικές μπάρες  H&R Audi A3, S3 (8L), TT (8N) Quattro / Seat Leon (1M) - (4WD) / VW Golf 4 - (4WD) - 2 Τεμ. - (H33431-1)

    Αντιστρεπτικές μπάρες H&R Audi A3, S3 (8L), TT (8N) Quattro / Seat Leon (1M) - (4WD) / VW Golf 4 - (4WD) - 2 Τεμ. - (H33431-1)

    • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Εμπρ. Πάχος: 25mm • Πίσω Πάχος: 21mm • Εμπρ Ρύθμιση: 2x • Πίσω Ρύθμιση: 2x • Εμπρ. Κωδ.: 33431 VA • Πίσω Κωδ.: 33431 HA Ταιριάζει σε: • Audi S3 Quattro 1999>, Typ 8L, 4WD S Σημείωση: 1. When fitting H&R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not. 2. Height adjustableat the front axle only
    Κωδικός: HR-33431-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 509,00€
  11. Αντιστρεπτικές μπάρες H&R VW Golf 2 & 3 (2WD) / VW Corrado (53i) / VW Jetta 2 / Seat Toledo (1L) 25mm/28mm - (33865-3)

    Αντιστρεπτικές μπάρες H&R VW Golf 2 & 3 (2WD) / VW Corrado (53i) / VW Jetta 2 / Seat Toledo (1L) 25mm/28mm - (33865-3)

    • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Εμπρ. Πάχος: 25mm • Πίσω Πάχος: 28mm • Εμπρ. Κωδ.: 33 865 VA3 (Μη Ρυθμιζόμενη) • Πίσω Κωδ.: 33 865 HA2 (3 Σκάλες Ρύμισης)
    Κωδικός: 33865-3 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 534,00€
  12. Αντιστρεπτικές μπάρες H&R Group Vag - (33525-2)

    Αντιστρεπτικές μπάρες H&R Group Vag - (33525-2)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Audi A3 , Typ 8L, 2WD - Year 08/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Seat Leon , Typ 1M, 2WD except Cupra R - Year 1999> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Seat Toledo , Typ 1M, 2WD except Cupra R - Year 1999> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW , Typ 1U, 2WD except RS Modelle/version - Year 01/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • VW Beetle, Typ 9C, 1Y, 1C, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • VW Bora Lim.+Sedan+SW, Typ 1J, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: No and Front: 2X and Ταιριάζει σε: • VW Golf IV Sedan SW, Typ 1J, 2WD - Year 07/97> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving. 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33525-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 551,00€
  13. Αντιστρεπτικές μπάρες H&R Audi A3 (8P), TT (8J) / Seat Leon (1P) / Skoda Octavia (1Z) / VW Golf 5, EOS, Passat 3C, CC - (33258-1)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8P), TT (8J) / Seat Leon (1P) / Skoda Octavia (1Z) / VW Golf 5, EOS, Passat 3C, CC - (33258-1)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A3+A3 Sportback incl. Cabrio/ Convertible , Typ 8P, 8PB, 2WD - Year 05/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi TT Coupe+Cabrio Coupe+Convertible , Typ 8J, 2WD - Year 08/06> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Altea incl. XL , Typ 5P, 5PN, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon , Typ 1P, 1PN, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Toledo , Typ 5P, 2WD - Year 05/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS , Typ 1Z, 2WD - Year 04/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Superb Sedan, Typ 3T, 2WD - Year 07/08> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Beetle, Typ 16,only 2.0L Turbo - Year 09/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW EOS, Typ 1F, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Golf V Sedan+ GTI+Golf Plus, Typ 1K, 1KP, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Jetta V Sedan, Typ 1KM, 2WD - Year 10/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Passat Sedan+ SW+CC, Typ 3C,3CC, 3c, 2WD - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:22mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Touran+Cross Touran, Typ 1T, 2WD - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33258-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 586,00€
  14. Αντιστρεπτικές μπάρες  H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-2)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-2)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A3 + A3 Sportback , Typ 8V, 2WD, only for cars with multilink RA, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi TT Coupe, Typ 8J/8S, 2WD, only for cars with Multilink rear axle - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/AUV, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Variant/SW, Typ AU, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 604,00€
  15. Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8)

    Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Ibiza incl. Cupra + FR, Typ 6Y, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Seat Ibiza, Typ 6J, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 6Y, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 5J, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • VW Fox , Typ 5Z, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Polo incl. GTI , Typ 9N, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-8 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 604,00€
  16. Αντιστρεπτικές μπάρες  H&R AUDI A1 8X / SEAT IBIZA FR (6J) / VW POLO (6R) - (33325-3)

    Αντιστρεπτικές μπάρες H&R AUDI A1 8X / SEAT IBIZA FR (6J) / VW POLO (6R) - (33325-3)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Audi A1 incl. Sportback, Typ 8X, 2WD - Year 08/10> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Ibiza FR , Typ 6J, 2WD - Year 06/08> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. Cut out front inner plastic wheel house for sufficient freedom of motion 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Polo , Typ 6R, 2WD except GTI + WRC - Year 08/10> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-3 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 619,00€
  17. Αντιστρεπτικές μπάρες H&R Audi A3 (8V) & S3 , TT (8S), Q2 (GA) Quattro - Seat Leon (5F) 4WD - Skoda Octavia (5E) 4WD - VW Golf 7 R - 27mm / 25mm - 2 Τεμ. - (33851-8)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8V) & S3 , TT (8S), Q2 (GA) Quattro - Seat Leon (5F) 4WD - Skoda Octavia (5E) 4WD - VW Golf 7 R - 27mm / 25mm - 2 Τεμ. - (33851-8)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi A3 + A3 Sportback Quattro A3 Sedan, Typ 8V, 4WD,only for cars with multilink RA Sedan + Cabrio/ Convertible: i.V. - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi S3 incl. Sedan + Sportback incl. Cabrio/ Convert., Typ 8V, 4WD,only for cars with multilink RA - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi S3 Cabrio/ Convertible, Typ 8V + 8VA, 4WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • Audi TT Coupe + Roadster Quattro, Typ 8J/8S, 4WD,only for cars with multilink RA - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • Seat Leon X-Perience, Typ 5F, 4WD,only for cars with multilink RA - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, Typ 5E, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII R incl. Variant/SW R, Typ AU, 4WD - Year 2013> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-8 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 619,00€
  18. Αντιστρεπτικές μπάρες  H&R POLO (6R) GTI + WRC - (33325-4)

    Αντιστρεπτικές μπάρες H&R POLO (6R) GTI + WRC - (33325-4)

    Τιμή eshop (Με ΦΠΑ) 619,00€
  19. Αντιστρεπτικές μπάρες  H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-4)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-4)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi A3 + A3 Sportback , Typ 8V, 2WD, only for cars with multilink RA, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi TT Coupe, Typ 8J/8S, 2WD, only for cars with Multilink rear axle - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/AUV, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • VW Golf VII Variant/SW, Typ AU, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-4 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 619,00€
  20. Αντιστρεπτικές μπάρες  H&R SKODA OCTAVIA (1Ζ) - (33258-2)

    Αντιστρεπτικές μπάρες H&R SKODA OCTAVIA (1Ζ) - (33258-2)

    Τιμή eshop (Με ΦΠΑ) 620,00€

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 1
  2. 2
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.