Γραμμή εξυπηρέτησης : 211 800 9140

Καλωσορίσατε στον κόσμο του αυτοκινήτου και των ανταλλακτικών

211 800 9140

Volkswagen

Υποκατηγορίες που ανήκουν στην κατηγορία Volkswagen

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 1
  2. 2
  3. 3
  1. Αντιστρεπτικές μπάρες Whiteline VW GOLF 5 + 6 / PASSAT (3C) - (BWK002)

    Αντιστρεπτικές μπάρες Whiteline VW GOLF 5 + 6 / PASSAT (3C) - (BWK002)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: VW Golf 5/6, Passat 3C • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BWK002 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 599,00€
  2. Αντιστρεπτικές Μπάρες  H&R Audi A3 & S3 (8P) Quattro / Skoda Octavia (1Z) & Superb II 4x4 / VW Golf 5 & 6 / Passat 3C & CC / Tiguan (5N) - (33220-1)

    Αντιστρεπτικές Μπάρες H&R Audi A3 & S3 (8P) Quattro / Skoda Octavia (1Z) & Superb II 4x4 / VW Golf 5 & 6 / Passat 3C & CC / Tiguan (5N) - (33220-1)

    Πάχος μπροστά: 24mm / πίσω 26mm Ρυθμίσεις μπροστά 2x / πίσω 2x
    Κωδικός: 33220-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 603,00€
  3. Αντιστρεπτικές μπάρες  H&R VW POLO ( 9N ) - (33325-6)

    Αντιστρεπτικές μπάρες H&R VW POLO ( 9N ) - (33325-6)

    Χαρακτηριστικά: • Διάμετρος Front: 22mm and Rear: 25mm • Ρύθμιση: Front: No and Rear: No Ταιριάζει σε: VW Polo, Typ 9N - Year: 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-6 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 604,00€
  4. Αντιστρεπτικές μπάρες  H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-2)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-2)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A3 + A3 Sportback , Typ 8V, 2WD, only for cars with multilink RA, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi TT Coupe, Typ 8J/8S, 2WD, only for cars with Multilink rear axle - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/AUV, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Variant/SW, Typ AU, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 604,00€
  5. Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8)

    Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Ibiza incl. Cupra + FR, Typ 6Y, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Seat Ibiza, Typ 6J, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 6Y, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 5J, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • VW Fox , Typ 5Z, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Polo incl. GTI , Typ 9N, for cars with a big square muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-8 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 604,00€
  6. Αντιστρεπτικές μπάρες  H&R POLO (6R) GTI + WRC - (33325-4)

    Αντιστρεπτικές μπάρες H&R POLO (6R) GTI + WRC - (33325-4)

    Τιμή eshop (Με ΦΠΑ) 619,00€
  7. Αντιστρεπτικές μπάρες  H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-4)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8V) / TT (8J) / Seat Leon FR (5F) / Skoda Octavia (5E) / VW Golf 7 (AU) - (33851-4)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi A3 + A3 Sportback , Typ 8V, 2WD, only for cars with multilink RA, approval i.d. Sedan + Cabrio/ Convertible: i.V. - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi TT Coupe, Typ 8J/8S, 2WD, only for cars with Multilink rear axle - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon incl. SC + FR + ST incl. Cupra, Typ 5F, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with multilink rear axle - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII Sedan incl. Sportsvan + Variant/SW , GTI + GTI Performance, Typ AU/AUV, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • VW Golf VII Variant/SW, Typ AU, 2WD, only for cars with Multilink rear axle - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-4 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 619,00€
  8. Αντιστρεπτικές μπάρες  H&R AUDI A1 8X / SEAT IBIZA FR (6J) / VW POLO (6R) - (33325-3)

    Αντιστρεπτικές μπάρες H&R AUDI A1 8X / SEAT IBIZA FR (6J) / VW POLO (6R) - (33325-3)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No Ταιριάζει σε: • Audi A1 incl. Sportback, Typ 8X, 2WD - Year 08/10> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Ibiza FR , Typ 6J, 2WD - Year 06/08> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. Cut out front inner plastic wheel house for sufficient freedom of motion 3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Polo , Typ 6R, 2WD except GTI + WRC - Year 08/10> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-3 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 619,00€
  9. Αντιστρεπτικές μπάρες  H&R SKODA SUPERB (3T / 3V) / VW PASSAT (3C) - (33784-2)

    Αντιστρεπτικές μπάρες H&R SKODA SUPERB (3T / 3V) / VW PASSAT (3C) - (33784-2)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Superb Sedan, Typ 3T/3V, 2WD - Year 2015> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:24mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Passat Sedan, Typ 3C (B8), 2WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33784-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 619,00€
  10. Αντιστρεπτικές μπάρες H&R Audi A3 (8V) & S3 , TT (8S), Q2 (GA) Quattro - Seat Leon (5F) 4WD - Skoda Octavia (5E) 4WD - VW Golf 7 R - 27mm / 25mm - 2 Τεμ. - (33851-8)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8V) & S3 , TT (8S), Q2 (GA) Quattro - Seat Leon (5F) 4WD - Skoda Octavia (5E) 4WD - VW Golf 7 R - 27mm / 25mm - 2 Τεμ. - (33851-8)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi A3 + A3 Sportback Quattro A3 Sedan, Typ 8V, 4WD,only for cars with multilink RA Sedan + Cabrio/ Convertible: i.V. - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • Audi S3 incl. Sedan + Sportback incl. Cabrio/ Convert., Typ 8V, 4WD,only for cars with multilink RA - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi S3 Cabrio/ Convertible, Typ 8V + 8VA, 4WD - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • Audi TT Coupe + Roadster Quattro, Typ 8J/8S, 4WD,only for cars with multilink RA - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • Seat Leon X-Perience, Typ 5F, 4WD,only for cars with multilink RA - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, Typ 5E, 4WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • VW Golf VII R incl. Variant/SW R, Typ AU, 4WD - Year 2013> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-8 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 619,00€
  11. Αντιστρεπτικές Mπάρες H&R VW Golf 3 / Corrado (53i) VR6 - (33865-2)

    Αντιστρεπτικές Mπάρες H&R VW Golf 3 / Corrado (53i) VR6 - (33865-2)

    • Μειώνει τις στρεβλώσεις του σασί. • Βελτιώνει το κράτημα του αυτοκινήτου. • Μειώνει την υποστροφή και την υπερστροφή. • Διατηρείται η εργοστασιακή άνεση. • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών. • Με TUV έγκριση. Χαρακτηριστικά: • Διάμετρος Μπροστά: 25mm • Διάμετρος Πίσω: 25mm • Ρύθμιση: Οχι
    Κωδικός: 33865-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 620,00€
  12. Αντιστρεπτικές μπάρες  H&R SKODA OCTAVIA (1Ζ) - (33258-2)

    Αντιστρεπτικές μπάρες H&R SKODA OCTAVIA (1Ζ) - (33258-2)

    Τιμή eshop (Με ΦΠΑ) 620,00€
  13. Αντιστρεπτικές μπάρες  H&R GOLF 6 - (33014-2)

    Αντιστρεπτικές μπάρες H&R GOLF 6 - (33014-2)

    Τιμή eshop (Με ΦΠΑ) 629,00€
  14. Αντιστρεπτικές μπάρες  H&R VW BUS T5 ( 7HM + 7HMA + 7HC + 7HCA + 7HKX0 + 7HK + 7J0 + 2WD+4WD ) - (33267-1)

    Αντιστρεπτικές μπάρες H&R VW BUS T5 ( 7HM + 7HMA + 7HC + 7HCA + 7HKX0 + 7HK + 7J0 + 2WD+4WD ) - (33267-1)

    Χαρακτηριστικά: • Διάμετρος Front: 26mm and Rear: 30mm • Ρύθμιση: Front: 2X and Rear: No Ταιριάζει σε: VW Bus T5 incl. Facelift, Typ 7HM, 7HMA, 7HC, 7HCA, 7HKX0, 7HK, 7J0, 2WD+4WD not for Xenon - Year: 03/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33267-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 630,00€
  15. Αντιστρεπτικές μπάρες  H&R SKODA SUPERB (3T / 3V) / VW PASSAT (3C) - (33784-3)

    Αντιστρεπτικές μπάρες H&R SKODA SUPERB (3T / 3V) / VW PASSAT (3C) - (33784-3)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • Skoda Superb Sedan, Typ 3T/3V, 2WD - Year 2015> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:26mm • Ρύθμιση: Front: 2X and Front: No Ταιριάζει σε: • VW Passat Sedan, Typ 3C (B8), 2WD - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33784-3 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 634,00€
  16. Αντιστρεπτικές μπάρες  H&R VW BUS T5 ( 7HM + 7HMA + 7HC + 7HCA + 7HKX0 + 7HK + 7J0 + 2WD+4WD )  - (33267-2)

    Αντιστρεπτικές μπάρες H&R VW BUS T5 ( 7HM + 7HMA + 7HC + 7HCA + 7HKX0 + 7HK + 7J0 + 2WD+4WD ) - (33267-2)

    Χαρακτηριστικά: • Διάμετρος Front: 26mm and Rear: 30mm • Ρύθμιση: Front: 2X and Rear: No Ταιριάζει σε: VW Bus T5 incl. Facelift, Typ 7HM, 7HMA, 7HC, 7HCA, 7HKX0, 7HK, 7J0, 2WD+4WD only for Xenon - Year: 03/03> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33267-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 657,00€
  17. Αντιστρεπτικές μπάρες H&R Group Vag - (33325-7)

    Αντιστρεπτικές μπάρες H&R Group Vag - (33325-7)

    Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Ibiza incl. Cupra + FR , Typ 6Y, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Seat Ibiza , Typ 6J, 29015-1 + 29015-2 /Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 6Y, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • Skoda Fabia incl. SW, incl. RS , Typ 5J, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Fox, Typ 5Z, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:22mm and Rear:25mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • VW Polo incl. GTI, Typ 9N, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over , for cars with a big square-cut muffler. - Year 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-7 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 663,00€
  18. Αντιστρεπτικές μπάρες  H&R VW POLO ( 9N ) - (33325-5)

    Αντιστρεπτικές μπάρες H&R VW POLO ( 9N ) - (33325-5)

    Χαρακτηριστικά: • Διάμετρος Front: 22mm and Rear: 25mm • Ρύθμιση: Front: No and Rear: No Ταιριάζει σε: VW Polo , Typ 9N 29325-1/Set incl. 2 sway-bar-links for coil-over 29325-1 - Year: 11/01> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer. 3. Cut out front inner plastic wheel house for sufficient freedom of motion Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33325-5 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 663,00€
  19. Αντιστρεπτικές μπάρες Whiteline VOLKSWAGEN GOLF 7 (5G FWD) - (BWK018)

    Αντιστρεπτικές μπάρες Whiteline VOLKSWAGEN GOLF 7 (5G FWD) - (BWK018)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: VOLKSWAGEN GOLF MK7 5G FWD • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Αυστραλία • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BWK018 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 689,00€
  20. Αντιστρεπτικές μπάρες H&R Audi A3 (8V), Q2 (GA) 2WD, Seat Leon (5F) 2WD, Skoda Octavia (5E) 2WD - VW Golf 7 - 26mm / 25mm - 2 Τεμ. - (33851-5)

    Αντιστρεπτικές μπάρες H&R Audi A3 (8V), Q2 (GA) 2WD, Seat Leon (5F) 2WD, Skoda Octavia (5E) 2WD - VW Golf 7 - 26mm / 25mm - 2 Τεμ. - (33851-5)

    Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Audi A3 + A3 Sportback, Typ 8V, 2WD, only for cars with twist beam RA - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon incl. SC + FR, Typ 5F, 2WD, only for cars with twist beam RA - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Seat Leon ST, Typ 5F, 2WD, only for cars with twist beam RA - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • Skoda Octavia Lim+ Sedan/SW, incl. RS, Typ 5E, 2WD, only for cars with twist beam RA - Year 13> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:26mm and Rear:25mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • VW Golf VII Sedan + Variant/SW + Sportsvan, Typ AU/AUV, 2WD, only for cars with twist beam RA - Year 11/12> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33851-5 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 709,00€

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 1
  2. 2
  3. 3
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.