Γραμμή εξυπηρέτησης : 211 800 9140

Καλωσορίσατε στον κόσμο του αυτοκινήτου και των ανταλλακτικών

211 800 9140

BMW

Υποκατηγορίες που ανήκουν στην κατηγορία BMW

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 1
  2. 2
  1. Αντιστρεπτικές μπάρες πίσω Whiteline BMW E36 - (BBR38Z)

    Αντιστρεπτικές μπάρες πίσω Whiteline BMW E36 - (BBR38Z)

    Ρυθμιζόμενη 2 σημείων πίσω αντιστρεπτική της Whiteline 22mm Heavy Duty για BMW E36 Tαιριάζει σε: BMW 3 Series E36 316,318,320,323,325,328,M3 (Εκτός από 318Ti) • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BBR38Z - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 229,00€
  2. Σετ Αντιστρεπτικής Μπάρας H&R Για BMW Σειρά 3 (E36) 1992- (33925VA-K)

    Σετ Αντιστρεπτικής Μπάρας H&R Για BMW Σειρά 3 (E36) 1992- (33925VA-K)

    • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Εμπρ. Πάχος: 28mm • Πίσω Πάχος: 21mm • Εμπρ Ρύθμιση: 2x • Πίσω Ρύθμιση: 2x • Εμπρ. Κωδ.: 33925 VA • Πίσω Κωδ.: 33925 HA Ταιριάζει σε: • BMW 3er (E36) Lim. / Sedan + Coupe / Cabrio / Convertible Touring / SW 06/92>, Typ 3C, 3/C, 3B, 3/B Σημείωση: 1. When fitting H&R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not. 2. Height adjustableat the front axle only *Η φωτογραφία είναι ενδεικτική!!!
    Κωδικός: 33925VA-K - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 302,00€
  3. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3 - M3 (F80) / Σειρά 4 -M4 - (33802-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3 - M3 (F80) / Σειρά 4 -M4 - (33802-1)

    Χαρακτηριστικά: • Διάμετρος: Front:30mm • Ρύθμιση: Front: 2X Ταιριάζει σε: BMW 3er M3 (F80), Typ M3 - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:30mm • Ρύθμιση: Front: 2X Ταιριάζει σε: BMW 4er M4 Coupe (F82) + M4 Cabrio/ Convert. (F83), Typ M3 - Year 2014> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33802-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 396,00€
  4. Αντιστρεπτικές μπάρες Whiteline BMW Σειρά 3 (E90/91/92/93) - (BBK004)

    Αντιστρεπτικές μπάρες Whiteline BMW Σειρά 3 (E90/91/92/93) - (BBK004)

    Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE Ταιριάζει σε: BMW 3series (E90/91/92/93) • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Με TUV έγκριση Aποστολή σε όλη την Ελλάδα.
    Κωδικός: BBK004 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 439,00€
  5. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3 E36 Compact - (33973-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3 E36 Compact - (33973-1)

    Χαρακτηριστικά: • Διάμετρος Front: 28mm and Rear: 19mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW 3er (E36) Compact , Typ 3C, 3/CG - Year: 04/94> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33973-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 517,00€
  6. Αντιστρεπτικές μπάρες  H&R BMW Z3 E37 (R/C) - (33758-1)

    Αντιστρεπτικές μπάρες H&R BMW Z3 E37 (R/C) - (33758-1)

    Χαρακτηριστικά: • Διάμετρος Front: 28mm and Rear: 19mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW Z3 Roadster+Coupe (E37), Typ R/C - Year: 04/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33758-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 517,00€
  7. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3 (E30) - (33577-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3 (E30) - (33577-1)

    Χαρακτηριστικά: • Διάμετρος Front: 22mm and Rear: 18mm • Ρύθμιση: Front: 3X and Rear: 2X Ταιριάζει σε: BMW 3er (E30) incl. M3 Sedan+Cabrio/Convertible , Touring/SW, Typ 3/1, 3/R, 2WD, incl. M3 - Year: 11/82> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. 3. For cars BMW E30 without OE-rear axle stabilizer the following original BMW spare parts are needed for mounting the H&R stabilizer (2 of each), retaining clip stabilizer: 33551129195, hexagon screw with disc: 07119915066, sway bar link: 33551126932, hexagon screw: 07119912501, self locking hexagon nut: 07129946400, sway bar link holder: 33321127717, self locking collar nut: 31331092887. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33577-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 549,00€
  8. Αντιστρεπτικές ράβδοι H&R BMW Σειρά 3 (E36) - (33925-1)

    Αντιστρεπτικές ράβδοι H&R BMW Σειρά 3 (E36) - (33925-1)

    Χαρακτηριστικά: • Διάμετρος Εμπρός: 28mm O & πίσω: 21mm O • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW 3er (E36) Sedan+ Coupe/Cabrio/Convertible , Touring/SW, Typ 3C, 3/C, 3B, 3/B - Year: 06/92> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33925-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 560,00€
  9. Αντιστρεπτικές μπάρες  H&R BMW Z3 (MR/C) - (33936-2)

    Αντιστρεπτικές μπάρες H&R BMW Z3 (MR/C) - (33936-2)

    Χαρακτηριστικά: • Διάμετρος Front: 28mm and Rear: 21mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW Z3 M-Roadster+ M-Coupe, Typ MR/C - Year: 04/96> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33936-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 568,00€
  10. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1 & 3 (E81, E87, E82, E88) Σειρά 3 (E90,Ε91, E92, Ε93) - 2 Τμχ. - (33211-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1 & 3 (E81, E87, E82, E88) Σειρά 3 (E90,Ε91, E92, Ε93) - 2 Τμχ. - (33211-1)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:20mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • BMW 1er (E81+E87+E82+E88) Sedan+Coupe+Cabrio/ , Convertible, Typ 187, 182, 1K2, 1K4, 1C, 2WD, only cars with a straight front bar, without middle-crank, not for Servotronic (Bild) - Year 09/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:20mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • BMW 3er (E90/92) Sedan/Coupe 3er (E91) Touring/SW , 3er (E93) Cabrio/Convertible, Typ 390L, 392C, 3K, 3L, 3C, 2WD, incl. cars without active steering, only cars with a straight front bar, without middle-crank - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33211-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 569,00€
  11. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - ∅VA28mm/∅20mm - (33895-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - ∅VA28mm/∅20mm - (33895-1)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 2WD, all 4-cylinder except 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 2WD, all 4-cylinder except 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 2WD, all 4-cylinder except 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  12. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-5)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-5)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: No and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 2WD, only 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 2WD, only 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 2WD, only 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-5 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  13. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-3)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-3)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/xDrive, all 6-cylinder - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-3 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  14. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3/4 (F30 + F31 + F32 + F34) - (33895-6)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3/4 (F30 + F31 + F32 + F34) - (33895-6)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW , 3er GT, Typ 3L + 3K + 3-V, 4WD/ xDrive, only 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/ xDrive, only 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-6 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  15. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-4)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/4 (F20 + F21 + F30 + F31 + F32 + F34) - (33895-4)

    Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 1er (F20 + F21), Typ 1K2 + 1K4, 4WD/xDrive, all 4-cylinder except 125i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 3er (F30 + F31 + F34) Sedan + Touring/ SW, Typ 3L + 3K + 3-V, 4WD/xDrive, all 4-cylinder, except 320i + 328i , except 320i + 328i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:28mm and Rear:20mm • Ρύθμιση: Front: 2X and Front: 2X and Ταιριάζει σε: • BMW 4er Coupe (F32) incl. Cabrio/ Convertible, Typ 3C, 4WD/xDrive, all 4-cylinder, except 420i + 428i - Year 10/11> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33895-4 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 589,00€
  16. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 3 (E36) (M3) - (33936-1)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 3 (E36) (M3) - (33936-1)

    Χαρακτηριστικά: • Διάμετρος Front: 28mm and Rear: 24mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW 3er (E36) M3 Sedan Cabrio/Convertible , Typ M3B, M3/B - Year: 03/93> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33936-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 597,00€
  17. Αντιστρεπτικές μπάρες  H&R BMW X3 (X83) - (33224-1)

    Αντιστρεπτικές μπάρες H&R BMW X3 (X83) - (33224-1)

    Χαρακτηριστικά: • Διάμετρος Front: 26mm and Rear: 23mm • Ρύθμιση: Front: 2X and Rear: 2X Ταιριάζει σε: BMW X3, Typ X83 - Year: 01/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33224-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 597,00€
  18. Σετ Αντιστρεπτικές μπάρες H&R Z4 - E85 / E86 -  (33276-1)

    Σετ Αντιστρεπτικές μπάρες H&R Z4 - E85 / E86 - (33276-1)

    Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση • Διάμετρος : Μπροστά 27mm και Πίσω 21mm • Ρύθμιση: Μπροστά 2x και Πίσω 3χ • Ταιριάζει σε: BMW Z4 E85 - Roadster/ E86-Coupe (2003 έως 2008) • Εμπρ. Κωδ.: 33276 VA • Πίσω Κωδ.: 33276 HA
    Κωδικός: 33276-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 603,00€
  19. Αντιστρεπτικές μπάρες  H&R BMW E46 (Φ27mm / Φ21mm) - (33480-1)

    Αντιστρεπτικές μπάρες H&R BMW E46 (Φ27mm / Φ21mm) - (33480-1)

    Θέση τοποθέτησης: Μπροστινός άξονας Διάμετρος [mm]: 27 Ρυθμίσεισ: 2 σκάλες ρυθμιση Θέση τοποθέτησης: Πίσω άξονας Διάμετρος [mm]: 21 Ρυθμίσεισ: 3 σκάλες ρυθμιση Τύπος έγκρισης: Με TUV
    Κωδικός: 33480-1 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 605,00€
  20. Αντιστρεπτικές μπάρες  H&R BMW Σειρά 1/3 (E81 + E87 + E82 + E88 + E90 + 92) - (33211-2)

    Αντιστρεπτικές μπάρες H&R BMW Σειρά 1/3 (E81 + E87 + E82 + E88 + E90 + 92) - (33211-2)

    Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:20mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • BMW 1er (E81+E87+E82+E88) Sedan+Coupe+Cabrio/ , Convertible, Typ 187, 182, 1K2, 1K4, 1C, 4WD, only cars with a straight front bar, without middle-crank, not for Servotronic (Bild), without approval - Year 09/04> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Χαρακτηριστικά: • Διάμετρος: Front:27mm and Rear:20mm • Ρύθμιση: Front: No and Front: No and Ταιριάζει σε: • BMW 3er (E90/92) Sedan/Coupe 3er (E91) Touring/SW , 3er (E93) Cabrio/Convertible, Typ 390L, 392C, 3K, 3L, 3C, 4WD, incl. cars without active steering, only cars with a straight front bar, without middle-crank without approval - Year 03/05> Σημείωση: 1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut! 2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer. ------------------------------ Επιπλέον πληροφορίες: • Μειώνει τις στρεβλώσεις του σασί • Βελτιώνει το κράτημα του αυτοκινήτου • Μειώνει την υποστροφή και την υπερστροφή • Διατηρείται η εργοστασιακή άνεση • Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών • Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία • Με TUV έγκριση
    Κωδικός: 33211-2 - Μάθετε Περισσότερα
    Τιμή eshop (Με ΦΠΑ) 608,00€

Λίστα  Πλέγμα 

Φθίνουσα Ταξινόμηση
Σελίδα:
  1. 1
  2. 2
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.