Αντιστρεπτικές μπάρες H&R Group Vag - (33325-7)

Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• Seat Ibiza incl. Cupra + FR , Typ 6Y, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• Seat Ibiza , Typ 6J, 29015-1 + 29015-2 /Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• Skoda Fabia incl. SW, incl. RS , Typ 6Y, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• Skoda Fabia incl. SW, incl. RS , Typ 5J, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• VW Fox, Typ 5Z, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• VW Polo incl. GTI, Typ 9N, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over , for cars with a big square-cut muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------

Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση