Γραμμή εξυπηρέτησης : 211 800 9140

Καλωσορίσατε στον κόσμο του αυτοκινήτου και των ανταλλακτικών

211 800 9140

Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8)

Κωδικός Προϊόντος: 33325-8
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• Seat Ibiza incl. Cupra + FR, Typ 6Y, for cars with a big square muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No


Ταιριάζει σε:
• Seat Ibiza, Typ 6J, for cars with a big square muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No


Ταιριάζει σε:
• Skoda Fabia incl. SW, incl. RS , Typ 6Y, for cars with a big square muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No


Ταιριάζει σε:
• Skoda Fabia incl. SW, incl. RS , Typ 5J, for cars with a big square muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No


Ταιριάζει σε:
• VW Fox , Typ 5Z, for cars with a big square muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and


Ταιριάζει σε:
• VW Polo incl. GTI , Typ 9N, for cars with a big square muffler. - Year 11/01>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------

Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Αντιστρεπτικές μπάρες H&R Group Vag - (33325-8) is available for purchase in increments of 1

Διαθεσιμότητα:4-10 Εργάσιμες

Τιμή eshop (Με ΦΠΑ) 604,00€

Επιπλέον Πληροφορίες

Κατασκευαστής H&R
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.