Αντιστρεπτικές μπάρες H&R Group Vag - (33525-2)

Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:22mm
• Ρύθμιση: Front: No and Front: 2X and


Ταιριάζει σε:
• Audi A3 , Typ 8L, 2WD - Year 08/96>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:22mm
• Ρύθμιση: Front: No and Front: 2X and


Ταιριάζει σε:
• Seat Leon , Typ 1M, 2WD except Cupra R - Year 1999>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:22mm
• Ρύθμιση: Front: No and Front: 2X and


Ταιριάζει σε:
• Seat Toledo , Typ 1M, 2WD except Cupra R - Year 1999>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:22mm
• Ρύθμιση: Front: No and Front: 2X and


Ταιριάζει σε:
• Skoda Octavia Lim+ Sedan/SW , Typ 1U, 2WD except RS Modelle/version - Year 01/97>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:22mm
• Ρύθμιση: Front: No and Front: 2X and


Ταιριάζει σε:
• VW Beetle, Typ 9C, 1Y, 1C, 2WD - Year 07/97>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:22mm
• Ρύθμιση: Front: No and Front: 2X and


Ταιριάζει σε:
• VW Bora Lim.+Sedan+SW, Typ 1J, 2WD - Year 07/97>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:26mm and Rear:22mm
• Ρύθμιση: Front: No and Front: 2X and


Ταιριάζει σε:
• VW Golf IV Sedan SW, Typ 1J, 2WD - Year 07/97>


Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------

Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση