Αντιστρεπτικές Μπάρες
Υποκατηγορίες που ανήκουν στην κατηγορία Αντιστρεπτικές Μπάρες
-
Χαρακτηριστικά:
• Διάμετρος Front: 26mm and Rear: 22mm
• Ρύθμιση: Front: No and Rear: 2X
Ταιριάζει σε:
Porsche Boxster Spyder , Typ 987 - Year: 2009>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33180-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
621,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
621,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 24mm and Rear: 26mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
Porsche 911 C2/4 (964), Typ 964, 2WD+4WD, Carrera 2/4, not for WTL (Werksturbo-Look) not for Tiptronic - Year: 89>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33580-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
628,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
628,00€
-
Ρυθμιζόμενες εμπρός & πίσω αντιστρεπτικές (παχύτερες από τις εργοστασιακές) της WHITELINE
Ταιριάζει σε:
Ford Focus 3 RS LZ
To kit περιλαμβάνει:
-Εμπρός αντιστρεπτική 26mm
-Πίσω αντιστρεπτική 22mm ρυθμιζόμενη 3 σημείων
-Εμπρός ρυθμιζόμενα μπαράκια ζαμφόρ (σετ των 2)
-Πίσω μπαράκια ζαμφόρ (σετ των 2)
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Αυστραλία
• Με TUV έγκριση
Aποστολή σε όλη την Ελλάδα.
Κωδικός: BFK009 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
629,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
629,00€
-
Τιμή eshop (Με ΦΠΑ)
629,00€
Διαθεσιμότητα:Άμεσα Διαθέσιμο
Τιμή eshop (Με ΦΠΑ)
629,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 32mm and Rear: 24mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
Audi RS4 Lim.+Avant+Cabrio/ Sedan+SW+Convertible , Typ QB6, V8 4,2 L FSI Quattro, 4WD - Year: 12/05>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33250-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
630,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
630,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 26mm and Rear: 30mm
• Ρύθμιση: Front: 2X and Rear: No
Ταιριάζει σε:
VW Bus T5 incl. Facelift, Typ 7HM, 7HMA, 7HC, 7HCA, 7HKX0, 7HK, 7J0, 2WD+4WD not for Xenon - Year: 03/03>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33267-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
630,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
630,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:28mm and Rear:24mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Porsche Boxster+Boxster S , Typ 981 - Year 05/12>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:28mm and Rear:24mm
• Ρύθμιση: Front: No and Front: 2X and
Ταιριάζει σε:
• Porsche Cayman+Cayman S , Typ 981 - Year 05/12>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33879-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
633,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
633,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:27mm and Rear:26mm
• Ρύθμιση: Front: 2X and Front: No and
Ταιριάζει σε:
• Skoda Superb Sedan, Typ 3T/3V, 2WD - Year 2015>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:27mm and Rear:26mm
• Ρύθμιση: Front: 2X and Front: No
Ταιριάζει σε:
• VW Passat Sedan, Typ 3C (B8), 2WD - Year 2014>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33784-3 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
634,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
634,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 24mm and Rear: 22mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
Audi RS3 Sportback , Typ 8P Quattro - Year: 05/11>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33220-3 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
634,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
634,00€
-
Πλευρά τοποθέτησης: μπροστινός άξονας
Διάμετρος [mm]: 27
ρυθμιζόμενο: ρυθμιζόμενο σε δύο κατευθύνσεις
Πλευρά τοποθέτησης: πίσω άξονας
Διάμετρος [mm]: 25
ρυθμιζόμενο: μη ρυθμιζόμενο
Τύπος έγκρισης: με πιστοποιητικό TUV®
Προσέξτε τις οδηγίες εγκατάστασης:
Κατάσταση αντικειμένου: Κανονική
Κωδικός: 33810-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
634,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
634,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 30mm and Rear: 20mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
BMW 5er (F10), Typ 5L, 2WD without Dynamic Drive - Year: 03/10>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33894-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
634,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
634,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 24mm and Rear: 22mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
Audi TT RS Quattro Coupe+ Cabrio/Convertible , Typ 8J, 4WD - Year: 08/06>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33220-4 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
634,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
634,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 28mm and Rear: 26mm
• Ρύθμιση: Front: No and Rear: 2X
Ταιριάζει σε:
Mitsubishi EVO X , Typ CZ0 - Year: 06/08>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33009-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
639,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
639,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 30mm and Rear: 20mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
Mercedes W170 SLK I, Typ 170 all up to 260 kW, only for cars with original FA+RA stabilizers - Year: 08/96>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33769-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
654,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
654,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 26mm and Rear: 23mm
• Ρύθμιση: Front: No and Rear: 3X
Ταιριάζει σε:
Porsche 911 C2 (996), Typ 996, 2WD, Carrera, Cabrio/Convertible, Targa - Year: 1997>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33510-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
656,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
656,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 24mm and Rear: 26mm
• Ρύθμιση: Front: 2X and Rear: 2X
Ταιριάζει σε:
Porsche 911 C2/4 (964), Typ 964, 2WD+4WD, Carrera 2/4, not for WTL (Werksturbo-Look) only for Tiptronic, without TUV approval - Year: 89>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33580-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
656,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
656,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 26mm and Rear: 30mm
• Ρύθμιση: Front: 2X and Rear: No
Ταιριάζει σε:
VW Bus T5 incl. Facelift, Typ 7HM, 7HMA, 7HC, 7HCA, 7HKX0, 7HK, 7J0, 2WD+4WD only for Xenon - Year: 03/03>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33267-2 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
657,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
657,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 22mm and Rear: 25mm
• Ρύθμιση: Front: No and Rear: No
Ταιριάζει σε:
VW Polo , Typ 9N 29325-1/Set incl. 2 sway-bar-links for coil-over 29325-1 - Year: 11/01>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33325-5 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
663,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
663,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Seat Ibiza incl. Cupra + FR , Typ 6Y, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Seat Ibiza , Typ 6J, 29015-1 + 29015-2 /Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Skoda Fabia incl. SW, incl. RS , Typ 6Y, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Skoda Fabia incl. SW, incl. RS , Typ 5J, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Fox, Typ 5Z, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over for cars with a big square-cut muffler. - Year 11/01>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Polo incl. GTI, Typ 9N, 29325-1 + 29325-2/Set incl. 2 sway-bar-links for coil-over , for cars with a big square-cut muffler. - Year 11/01>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. This stabilizer set - including two sway bar links - is for use with coil-over 29 325-1 only and must be used for lowering beyond approx. 50 mm to achieve sufficient freedom of motion between driveshaft and stabilizer.
3. Cut out front inner plastic wheel house for sufficient freedom of motion
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33325-7 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
663,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
663,00€
-
Χαρακτηριστικά:
• Διάμετρος Front: 24mm and Rear: 24mm
• Ρύθμιση: Front: No and Rear: 4X
Ταιριάζει σε:
Porsche 911 C2 (997), Typ 997, 2WD, Carrera+Carrera S, incl. Facelift Mod. 2008, except PDK, (DFI-direct injection) - Year: 08/04>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33239-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
668,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
668,00€
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.
Παρακαλώ περιμένετε...