2 / 19E / 1G (1983 - 1992)
-
Αντιστρεπτικές μπάρες EIBACH VW CORRADO / GOLF 2 & 3 - (EIB-013-E8502320)
Κατασκευαστής: Eibach
Κωδικός προϊόντος: E8502-320
EAN: 4050278016919
Διάμετρος Εμπρ. άξονα: 22mm
Εμπρ. ρύθμιση: Δεν είναι ρυθμιζόμενη
Διάμετρος πίσω άξοναr: 25mm
Πίσω ρύθμιση: Δεν είναι ρυθμιζόμενη
Ταιριάζει σε:
• VW Corrado (53I),
• VW Golf II (19E, 1G1),
• VW Golf III (1H1),
• VW Golf III Cabriolet (1E7),
• VW Golf IV Cabriolet (1E7),
• VW Jetta II (19E, 1G2, 165),
• VW Vento (1H2)
Κωδικός: EIB-013-E8502320 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
359,00€
Διαθεσιμότητα:Παράδοση έως 30 ημέρες
Τιμή eshop (Με ΦΠΑ)
359,00€
-
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• Seat Toledo , Typ 1L - Year 1991>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Corrado, Typ 53i, except VR6 - Year 11/88>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Golf II, Typ 19E - Year 08/83>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Golf III Sedan Cabrio/Convertible, Typ 1HXO, 1H, 1EXO, 1E,only 4-hole-wheelwithout GTI-TDI (110 PS), GTI, 16V+VR6/incl. TDI - Year 1991>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Jetta II, Typ 19E - Year 08/83>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Χαρακτηριστικά:
• Διάμετρος: Front:22mm and Rear:25mm
• Ρύθμιση: Front: No and Front: No and
Ταιριάζει σε:
• VW Vento Sedan, Typ 1HXO, 1H,only 4-hole-wheelwithout GTI-TDI (110 PS), GTI, 16V+VR6/incl. TDI - Year 1991>
Σημείωση:
1. Front axle - Only if the distance of the bottom fastening point bracket (center of the hole) up to the centre line of the strut housing = 56 mm AND: If the distance of both fastening holes in the bracket = 54 mm ( center of the hole). Take these dimensions carefully from the original strut!
2. When fitting rear axle stabilizers together with non OE exhaust systems packaging problems might arise. A contact between stabilizer and exhaust is possible. This has to be checked prior to fitment and solved prior to first driving.
3. FA stabilizer may also be used without rear stabilizer. In this case vehicle might tend to understeer.
------------------------------
Επιπλέον πληροφορίες:
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Με TUV έγκριση
Κωδικός: 33865-1 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
483,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
483,00€
-
• Μειώνει τις στρεβλώσεις του σασί
• Βελτιώνει το κράτημα του αυτοκινήτου
• Μειώνει την υποστροφή και την υπερστροφή
• Διατηρείται η εργοστασιακή άνεση
• Συμβατό με την εργοστασιακή ανάρτηση ή sport αναρτήσεις άλλων εταιριών
• Σχεδιασμένο, κατασκευασμένο και ελεγμένο στην Γερμανία
• Εμπρ. Πάχος: 25mm
• Πίσω Πάχος: 28mm
• Εμπρ. Κωδ.: 33 865 VA3 (Μη Ρυθμιζόμενη)
• Πίσω Κωδ.: 33 865 HA2 (3 Σκάλες Ρύμισης)
Κωδικός: 33865-3 - Μάθετε Περισσότερα
Τιμή eshop (Με ΦΠΑ)
534,00€
Διαθεσιμότητα:4-10 Εργάσιμες
Τιμή eshop (Με ΦΠΑ)
534,00€
Αυτή η σελίδα χρησιμοποιεί cookies. Συνεχίζοντας την περιήγηση στη σελίδα, συναινείτε στη χρήση τους.
Παρακαλώ περιμένετε...